Variability of Omega-3/6 Fatty Acid Obtained Through Extraction-Transesterification Processes from Phaeodactylum tricornutum.

The effect of direct transesterification methods on the omega-3/6 composition of extracts from Phaeodactylum tricornutum was studied. The aim of this work was to identify an extraction method which allowed to obtain the most suitable profile of fatty acids in terms of its potential benefits to health, particularly if further used in the food industry. Seven methods using acids, alkalis, and heterogeneous-catalysts, (namely methods from 1 to 7, abbreviated as M1-M7) were performed to determine α-linolenic (ALA), linoleic (LA), docosahexaenoic (DHA) and eicosapentaenoic (EPA) acids. The composition of fatty acids was in all cases characterized by the major abundance of palmitic (23.95-34.08%), palmitoleic (30.94-35.56%), oleic acids (3.00-7.41%), and EPA (0.5-6.45%). Unsaturated fatty acids extraction yield was higher with a two-step transesterification process (M6, 63.65%). The total fatty acid methyl ester content (FAME) obtained with acid-transesterification (M1) reached about 21% wt, and 60% w/w total lipids. ALA higher relative content (ALA/LA ratio) was obtained when a lipid pre-extraction step was performed prior to acid-catalysis (M4). The transesterification method based on alkali-catalyst (M3, KOH catalyst) led to obtain higher DHA relative contents (DHA/EPA ratio up to 0.11), although its FAME content was 3.75-fold lower than that obtained with acid-transesterification (M1). Overall, this study shows that direct transesterification with alkali-catalyst (M3) improves the determination of PUFA content from the diatom through a more efficient transesterification-based extraction process, and thus allow to assess the value of the biomass more accurately for application in the food industry.

Effect of Drying Methods on Lutein Content and Recovery by Supercritical Extraction from the Microalga Muriellopsis sp. (MCH35) Cultivated in the Arid North of Chile.

In this study, we determined the effect of drying on extraction kinetics, yield, and lutein content and recovery of the microalga Muriellopsis sp. (MCH35) using the supercritical fluid extraction (SFE) process. The strain was cultivated in an open-raceways reactor in the presence of seawater culture media and arid outdoor conditions in the north of Chile. Spray-drying (SD) and freeze-drying (FD) techniques were used for dehydrating the microalgal biomass. Extraction experiments were performed by using Box-Behnken designs, and the parameters were studied: pressure (30-50 MPa), temperature (40-70 °C), and co-solvent (0-30% ethanol), with a CO2 flow rate of 3.62 g/min for 60 min. Spline linear model was applied in the central point of the experimental design to obtain an overall extraction curve and to reveal extraction kinetics involved in the SFE process. A significant increase in all variables was observed when the level of ethanol (15-30% v/v) was increased. However, temperature and pressure were non-significant parameters in the SFE process. The FD method showed an increase in lutein content and recovery by 0.3-2.5-fold more than the SD method. Overall, Muriellopsis sp. (MCH35) is a potential candidate for cost-effective lutein production, especially in desert areas and for different biotechnological applications.

Determining the Potential of Haematococcus pluvialis Oleoresin as a Rich Source of Antioxidants.

Haematococcus pluvialis is known to be a natural source of antioxidants for numerous applications. In this study, an oleoresin rich in carotenoids extracted by supercritical CO2 treatment of H. pluvialis was extensively characterized for its antioxidant capacity. Carotenoid content, fatty acid profile, total phenol content, antioxidant capacity, and viscosity of the oleoresin were determined with the aim of ascertaining the potential of the oleoresin in terms of its antioxidant content for food applications. The oleoresin contained 96.22 mg/g of total astaxanthin (which includes free astaxanthin and astaxanthin esters) and mostly included unsaturated fatty acids (~78% of total fatty acids). High total phenol content and ferric reducing antioxidant potential indicated high antioxidant capacity, but oxygen radical absorbance capacity was lower compared to the oleoresin samples obtained from other species. The oleoresin was a non-Newtonian fluid since it had shear-thinning (pseudoplastic) and shear-thickening (dilatant) flow. Therefore, the H. pluvialis oleoresin is a potential alternative in developing functional ingredients for designing healthy food products. To the best of our knowledge, this is the first study that has reported an extensive characterization of the antioxidant properties of a microalgal oleoresin obtained by means of supercritical CO2 fluid extraction.

Alimentos dietéticos para regímenes de control de peso / Dietetic food to prevent obesity

Se elaboraron tres alimentos dietéticos, dos de ellos son dulces desarrollados a partir de semielaborados de mango y guayaba, yogur fortificado, fibra dietética y aditivos nutricionales. El tercero, similar en composición, es una crema de tomate que debe consumirse mezclada con leche semidescremada. Cada paciente ingirió 1,5 kg/día divididos en seis raciones iguales, que incluyeron muestras de ambos tipos de alimentos, eligiendo libremente la combinación de su agro. Esta forma de consumo garantizó que se cumplieran algunos requisitos del CODEX para estos pacientes como: contenido energético total entre 3,35 y 5,03 kJ y un consumo adecuado de proteínas de alta calidad. Las pruebas clínicas con dos grupos de 36 pacientes mostraron una pérdida de peso de 3,5 ñ 0,7 kg en tres semanas de tratamiento